February 2007 Homebrewpower-Magazine-Out-Now-£2.00-Instant-Download

February 2007 Homebrewpower Mag Out Now - £2.00 Instant Download


BUY IT NOW LINK http://tinyurl.com/3x7qu6

I am very pleased to announce that the February edition of Homebrewpower Magazine is now out.
It is a brand new monthly publication. If it reaches 2000 purchases then it will become my full time job and will give me the opportunity to bring you the latest news on Eco & Sustainable energy from the UK and around the world.

Please help me make this happen. I need interest from around the globe, I call on advertisers, sponsors, people & groups to purchase this months magazine.

If this works out I will be able to develop my hobby and magazine all year round and bring you the information you want each and every month. I have spent a full month every evening designing, writing, changing & researching Homebrewpower mag and hope this is a taster of things to come.

The more who purchase Homebrewpower Mag the bigger and better it will get.

Homebrewpower will bring you future info on the following.
M CHP Micro Combined Heating & Power Installation and systems (CHAP)
Solar PV
Solar Thermal
Alternative Energy
Hydro Power
Geo Thermal
Wind Turbine Installations
DIY Projects
Technical Advise
Case Studies
UK Reports
Site Visits
Help
On Test This Month
Startling Photography and Graphics
In The News
Plus Much Much More............

My future is in your hands.

Owner & Publisher Of Homebrewpower
Andy Mahoney

Lister-CS-Exhaust-Heat-Exchanger

Just a quick note to show you all my completed exhaust heat exchanger for my Lister CS I have a ton more pictures on the homepage www.homebrewpower.co.uk Click on the photo album link.

Andy Mahoney

Fabricating-A-Exhaust-Heat-Exchanger-Lister-CS

I am almost finished with the fabrication of my direct exhaust heat exchanger for the heating of my DCH loop, at the moment I am running a loop of microbore around the exhaust baffle but wanted to run the microbore inside the baffle so I have completely refabricated my exchaust and heat exchanger and it should be live tomorrow evening after work!
The Lister CS 6/1 is running 24/7 right now and has been for 4 days and nights! No problems at all with the setup, just need a 230VAC generating head and the setup will be complete!!

Andy Mahoney
www.groups.yahoo.com/group/homebrewpower
Home made heating & power from sustainable fuels!
MolesMail@Gmail.com
Mobile: +44 (0)7707 365 588

Renewable-Energy-UK

Things I have done this evening:-

1. Dug second trench in back garden from my Generator house to the house and knocked out holes under house and in shed.
2. Laid 2 x 10mm Microbore pipes from house to Gen, both fully lagged!
3. Laid 2 x 16mm2 Twin & Earth cables from House to Gen shed, 1 for Mains power to house from inverter the other for 12VDC under the house.
4. Sanded, treated and sprayed Exhaust in High Temp Mat Black paint.
5. Sprayed all pipework for dual fuel in High temp matt black paint.
6. Installed & fabricated 8mm Microbore heat exchanger (15 Coils) around exhaust.
7. Stripped down injector on the Lister and tuned spray nozzle to get a very satisfying 40deg mist and the famoud 'Creeking' noise!!
8. Primed fuel and started Lister first time!

The Lister jumped into action without any hesitation at all, let it run for 5 seconds and went for the fuel governer, once I touched it it died. I tried opening the governer up again but nothing! I took the injecter out again and there was no spray pattern!!

The problem is the injecter nozzle and nothing more! I need a new or working one!

Tomorrow I have 2 jobs to do for people, new BT point and an outside light of all things! Once that is done I am going to couple all my pipework up and internally lag the pipes, may even couple up the system to my central heating....

Also I am painting my wind generator in 'Straight to metal' paint tomorrow, matt black to make it look even more neat and tiidy.

I am so close to first stage completion now I can see the light at the end of the tunnel.

Oh, I am hooking my coolent system up tomorrow as I now have all the pipework and fittings to do so, plus since I am on with that I'll be finishing the Veg oil storage tank brackets and pipework as well.

More later......