Running-A-Lister-CS-As-A-CHP-CHAP-Generator

I am almost finished with the fabrication of my direct exhaust heat exchanger for the heating of my DCH loop, at the moment I am running a loop of microbore around the exhaust baffle but wanted to run the microbore inside the baffle so I have completely refabricated my exchaust and heat exchanger and it should be live tomorrow evening after work!

The Lister CS 6/1 is running 24/7 right now and has been for 4 days and nights! No problems at all with the setup, just need a 230VAC generating head and the setup will be complete!!


Kind regards

Andy Mahoney
http://www.homebrewpower.co.uk/
www.groups.yahoo.com/group/homebrewpower
Home made heating & power from sustainable fuels!

info@homebrewpower.co.uk
Mobile: +44 (0)7504 50 50 89

Fabricating-A-Exhaust-Heat-Exchanger-Lister-CS

I am almost finished with the fabrication of my direct exhaust heat exchanger for the heating of my DCH loop, at the moment I am running a loop of microbore around the exhaust baffle but wanted to run the microbore inside the baffle so I have completely refabricated my exchaust and heat exchanger and it should be live tomorrow evening after work!
The Lister CS 6/1 is running 24/7 right now and has been for 4 days and nights! No problems at all with the setup, just need a 230VAC generating head and the setup will be complete!!

Andy Mahoney
www.groups.yahoo.com/group/homebrewpower
Home made heating & power from sustainable fuels!
MolesMail@Gmail.com
Mobile: +44 (0)7707 365 588